威尼斯娱人城官网(3788.vip认证)-Copyright

How to Select High Quality Hub Renovation Equipment for NC Lathe Manufacturers

NC lathe manufacturers introduce that at present, the manufacturers of wheel hub refurbishment equipment are uneven. Many manufacturers exaggerate their equipment progressiveness, many of them are agents, and they don't even know the structure of the machine, let alone how to troubleshoot. Because he is only in charge of sales, when there is a problem, he either asks the manufacturer how to solve it, which not only delays the customer's valuable time, but also affects the customer's trust in the business, because ultimately the manufacturer still needs to go to the after-sales service. Other agents start to be careless and shirk their responsibilities once problems occur, or they just ignore people or even blackmail them. This kind of thing is often heard, and it's no wonder. Therefore, when buying wheel hub repair equipment, it's recommended to go directly to the manufacturer. Although it's a little far away, it can be directly after-sales. Another thing is the price discount, which is at least 30% more than the dealer. Another point is to try to go to the customer who bought the equipment to see what the customer said. Don't listen to what the seller said about the imported materials and advanced technology.

After the NC lathe manufacturer has programmed the parts, it is necessary to conduct trial cutting and debugging after the tool is set. In order to prevent errors in the program and errors in tool setting, which may lead to machine collision accidents, we should first simulate the idle stroke, and translate the tool to the right as a whole 2-3 times the total length of the parts in the coordinate system of the machine tool; Then start the simulation processing. After the simulation processing is completed, confirm that the program and tool setting are correct, and then start the processing of the parts. After the first part is processed, first conduct self inspection, confirm that it is qualified, and then find a full-time inspector to check. After the full-time inspector confirms that it is qualified, it means that the debugging is completed.